The Curt Short-Arm Weight Distribution Systems have trunnion bars which measure 28-3/8 inches, according to the manufacturer. These are pretty common on V-nose trailers, and come with a couple of different tongue weight options. I'll go ahead and list those out below so you can choose the right one:
- Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 10,000 lbs GTW, 1,000 lbs TW # C17332
- Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 15,000... view full answer...
To install a gooseneck hitch in your 2016 Nissan Titan XD, I recommend the B&W Turnoverball Gooseneck Hitch item # BWGNRK1217. This system includes custom fit brackets that bolt into existing holes in your Nissan's frame. The only drilling you will need to do is in the bed when you add the holes for the receiver and the safety chains.
The B&W item # BWGNRK1217 underbed system allows you to store the 2-5/16" hitch ball upside down and inside your bed when you are not using it. This gives... view full answer...
The B&W Turnoverball Adapter for Trailers with Inverted Gooseneck Hitches # BWGNXA4025 has an inside diameter sized to accept a 2-5/16-inch inverted-hitch gooseneck ball. It fits into the square opening of the B&W Turnoverball under-bed gooseneck hitches. view full answer...
The RoadActive Suspension kits like the part # RAS3611 can increase the ride height of the truck they are installed on. Since these are adjustable it really depends on how tight you adjust them to know what the change in height would be. view full answer...
Per the Nissan Titan brochure for 2018, the Nissan Titan XD Diesel 4x4 crew cab has a 2,080lb maximum payload. Golf carts are about 1,000lbs usually and are typically right at 8 feet in length. If your truck bed is 8 feet you will have most likely right at 30 percent of the golf cart's weight as 300lbs of additional tongue weight.
To determine if your golf cart is pushing you over the limits use the GCWR of your Titan (can be found on the sticker on your driver's side door jamb), subtract... view full answer...
I checked with Lippert and the only option to replace the 308958 controller is the Replacement INwall My RV Control Panel for Schwintek RV Slide-Outs item # LC24HD. I suggest checking your fuses and making sure they are the correct amp. They may be over or under rated and are causing the controller to short out. view full answer...
The Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Package - 21,000 lbs # DM6200 has the standard measurement locations to fit with all the industry standard hitch sizes measuring 22 inches by either 29 or 20-1/2 inches. I've attached a photo of other industry standard rails with the dimension just like the adapter dimensions for you to see the similarities and differences. view full answer...
The UWS Truck Bed Chest # UWS01035 weighs 50 lbs total and is a somewhat larger size, but if you are reasonably strong you could maneuver it in and out of a truck bed. It would be much easier with a buddy though. view full answer...
The MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K # MR27ZR you were looking at measure 8" between the horizontal mounting holes, and 3-5/16" between the center of the horizontal mount holes and the vertical mounting hole as you can see in the included diagram.
If your current equalizer is taller than 3-5/16" then you will lower the trailer slight, but if it is shorter than 3-5/16" you will slightly raise the trailer.
The # MR27ZR is designed for Tandem axle trailers... view full answer...
I checked with our vendors and there is one solution that will set your 2018 Nissan Titan XD up with both a gooseneck hitch and a compatible sliding 5th wheel hitch. To add a gooseneck hitch you'll need the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit item # BWGNRK1217. This system installs with custom fit brackets and has a 30,000 lbs capacity.
The best part about B&W's Turnoverball system item # BWGNRK1217 is that when you are not towing you can flip... view full answer...
The Demco 5th Wheel Rail Adapter # DM6200 for your 2018 Nissan Titan XD has the following measurements which I have also included in the picture as well.
Center of hitch to front edge of adapter- 10-3/4"
Hitch is 2-1/4" in diameter
Center of 5th wheel front mounts to front edge of adapter- 3-9/16" view full answer...
The Curt A16 5th Wheel Trailer Hitch # C16520-16026 weighs a total of 196 lbs. It can be broken down into smaller sections but it's not really designed for that so it would be a bit more involved than other hitches that are.
This will be the lightest weight option though that we have for the factory rail kit of your 2017 Nissan Titan XD. view full answer...
I spoke with my contact at Curt and they informed me that the case dimensions of the Curt Curt Ball and Safety Chain Loop Kit # C60692 are 16.5"x10.5"x5". view full answer...
You can use a longer weight distribution shank to add extra length like with the Curt # C17122 which is 16 inches long and has a maximum rise of 10-1/2 inches or drop of 7 inches. But you cannot use a hitch extender with a weight distribution system like the part # C45795. view full answer...